Kit version (if you need to solder)

If you got the kit version, you should solder the headers and other parts. For detailed soldering instructions you can check the following video:

To Do

Assembled version (just connect modules)

You may need to finish the assembly connecting the modules and the camera:

• Connect the ESP32 and NRF24/CC1101 following the orientation mark on the pcb

• Insert the camera module as shown in the First steps page

Upload firmware and faps (for the first time)

With the board assembled, you may need to upload the firmware and the faps. Follow the instructions in https://flipper.flipperphoenix.xyz/webinstaller (opens in a new tab) for Version 1 or follow the instructions in https://flipperphoenix.xyz/webinstaller (opens in a new tab) for thhe new Version 2.

The following video can help too, but your process can be different. For example, the faps can be already included in some distributions of the firmware for the flipper zero.